What Is Roofing Flashing
Flashing is a thin piece of aluminum, galvanized metal, plastic, rubberized asphalt, butyl rubber and other specialty components that helps form a barrier against water. It’s commonly placed where two different building materials, such as siding and shingles, meet. Without this type of system, water can creep down into the home, but with it, the rain simply runs off the shingles. epoxy floor installation
What Kinds Of Problems Stem From Incorrect Or Missing Flashing
If your house is missing this system, your home is susceptible to severe water damage. Without this system, water can run behind the house siding and down into the walls of the home. This constant water can lead to drywall, wall studs and more that never truly dry out, creating a breeding ground for dangerous mold. Additionally, the materials within the walls can actually rot, which could eventually lead to structural problems within the house. The repair bills from the damage can be astronomical, leading many homeowners to lament why they didn’t know that it could be prevented.
How To Check Your Existing Roof
Some homes will have a system that you can see, while others will be installed underneath the shingles. If you’re noticing water damage or you have symptoms that might indicate that you have mold growing within your house, consider calling roofing contractors to come inspect your flashing system. A majority of water damage actually isn’t caused by leaky shingles — it’s caused by incorrectly installed or missing systems.
What If The Roof Needs To Be Replaced Entirely
If you need to replace the roof completely, make sure to ask about the type of flashing that the roofing company will use. Your company might prefer to use a certain type of materials depending on the situation so don’t be afraid to ask what they’ll use and why. A company that truly cares about its customers will want them to be as knowledgeable as possible and won’t be afraid to explain what’s happening every step of the way.
If you’re met with a blank stare when you ask your roofing contractors about a flashing system, consider moving on to a new roofing company. While it can be tempting to go with the lowest bidder when it comes to installing your new roof, cutting corners is a sure-fire way to welcome water damage into your home. Your roof won’t work if it’s not installed correctly so make sure you’re working with a reputable company that takes the time to ensure the job is done right the first time.